People who have small PA piercings, 10g, 8g, and even 6g as it helps hold the wand in place and takes a lot of the pressure off of the cross pin. This will make the wand much more enjoyable to have in place, as it spreads the weight of the wand assembly over a larger support area. As you can see, I also make an offset ring version for those who need some adjustment in the ring location. And I have a double ring version.
The standard RINGED WAND is $145.00. This includes a wand, not over 4" = 102mm, and with a barrel size of not over 3/8" = 9.5mm, with end and cross balls, not to exceed 5/8" = 15.5mm, and they are not tapered. I can make them longer, thicker, and with balls up to 1 1/2" = 38mm, depending totally upon your needs or wants. These other options just cost a little more.
MULTIPLE SECTION RINGED WANDS can be made. in this way you can have several lengths with 1 wand. The pricing structure is as follows, for multiple part wands. If you make a wand you have to make 1 pipe; a 2 part wand requires you to make a second pipe, the charge for that is $30.00, now you have a 2 part wand pipe you can put extensions into. At this point you would have a 2-part wand with 1 length. Each extension part after that is $35.00. Example: a standard pinned ringed wand is $145.00, to make it a 2 part pipe is $30.00 = $175.00, this would give you a 2 part wand but still 1 length. To add a second length (an extension), is $35.00, = $210.00. This would give you a wand with three parts and two lengths. Once you have a 2-part wand, you can if you like, then get the flex kit, that has a flex part in the center that screws onto the front section of the wand. It is a $70.00 addition. Once you have a 2-part wand, you can if you like, then get the flex kit, that has a flex part in the center that screws onto the front section of the wand. It is a $70.00 addition. What this means is that you would have a wand with multiple lengths of solid piping, and another optional part (the flex) that would attach to the parent part of the wand to give you multiple lengths and a flexible portion in the center.
You can have a FLEX WAND that has a flex part in the center. This is much like the 2 part wand, as we have to make another part for the end, the cost is $175.00 for a pinned ringed flex wand.
|
