Standard Prince's Wands

The STANDARD WAND is composed of three parts, the wand, the end ball assembly, and the cross-pin assembly. This wand sells for $115.00. These are the standards for all of the wands I make. This includes a wand, not over 4" = 102mm, and with a barrel size of not over 3/8" = 9.5mm, with end and cross balls, not to exceed 5/8" = 15.5mm, and they are not tapered. I can make them longer, thicker, and with balls up to 1 1/2" = 38mm, depending totally upon your needs or wants. These other options just cost a little more.

MULTIPLE SECTION WANDS can be made; in this way you can have several lengths with 1 wand. The pricing structure is as follows, for multiple part wands. If you make a wand you have to make 1 pipe; a 2 part wand requires you to make a second pipe, the charge for that is $30.00, now you have a 2 part wand pipe you can put extensions into. At this point you would have a 2-part wand with 1 length. Each extension part after that is $35.00. Example: a standard pinned wand is $115.00, to make it a 2 part pipe is $30.00, = $145.00, this would give you a 2 part wand but still 1 length. To add a second length (an extension), is $35.00, = $180.00. This would give you a wand with three parts and two lengths. Once you have a 2-part wand, you can if you like, then get the flex kit, that has a flex part in the center that screws onto the front section of the wand. It is a $70.00 addition. What this means is that you would have a wand with multiple lengths of solid piping, and another optional part (the flex) that would attach to the parent part of the wand to give you multiple lengths and a flexible portion in the center.

The FLEX WAND has a flex in the center; this is much like the 2 part wand, as we have to make another part for the end, the cost is $145.00 for a pinned flex wand.